Browse Teaching Resources

1-10 of 91 Results
Fundamentals of Mechatronic Sensors

by Quanser Inc.

In this lab students will complete hands-on activities to measure, calibrate, and analyze common physical properties/phenomena. Designed for NI ELVIS III.
Mechatronic Systems Analysis

by Quanser Inc.

Students interact with a complete mechatronic system from low-level integration, through sub-systems and processes, to the higher-level automation algorithms. Designed for NI ELVIS III.
Fundamentals of Mechatronic Actuators

by Quanser Inc.

Students complete hands-on activities to control and compare common motors in order to make wise system design decisions. Designed for NI ELVIS III
RIO Developer Essentials Guide for Academia

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This Guide introduces students to a widely adopted NI RIO technology. Students will write LabVIEW code to communicate between PC hosts, real-time, and FPGA targets.
Temperature

by Quanser Inc.

In this lab students will use a thermistor to collect temperature data, calibrate the sensor, and determine its thermal time-constant. Designed for NI ELVIS III.
Pressure

by Quanser Inc.

In this lab students learn about pressure measurement and calibration through hands on activities with a capacitive pressure transducer. Designed for NI ELVIS III.
NI myRIO Vision Essentials Guide

by Dr. Ed Doering | Rose-Hulman Institute of Technology

This manual serves as a guide to the essential techniques necessary for students to add vision to their NI myRIO project. Students complete design projects that interact with the visual world to...
Controls Labs for the Quanser QUBE Servomotor and Pendulum

by Quanser Inc.

This set of ABET-aligned labs introduces students to control systems for a servomotor and pendulum. Student design simple to complex models and control systems, and ultimately design and stabilize a...
NI myRIO Project Essentials Guide

by Dr. Ed Doering | Rose-Hulman Institute of Technology

The myRIO Project Essentials Guide serves as the guide to interfacing NI myRIO to the wide variety of sensors, actuators, and displays that students will need for projects.
Position-Controlled Actuators

by Quanser Inc.

In this lab students will learn about open-loop and closed-loop actuator position control in a hands-on application. Designed for use with NI ELVIS III.